HP Carrier-grade cc3300 Intel Server Management (ISM) Installation and User&am - Page 85

Command SYS HEALTH QUERY SYS HEALTH QUERY (cont) Switches SYS 000157 ACTIVATE SYS ID SYS NETWORK MAC| IP| SUBNET | GATEWAY SYS DIAGINT Description Causes the BMC to return a high level version of the system health status in terse format. The BMC returns a string with the following format if the command is accepted. PWR:zzz H:xx T:xx V:xx PS:xx C:xx D:xx S:xx O:xx Where: PWR is system POWER state H is overall Health T is Temperature V is Voltage PS is Power Supply subsystem F is cooling subsystem (Fans) D is Hard Drive / RAID Subsystem S is physical Security O is Other (OEM) zzz is: ON, OFF (soft-off or mechanical off), SLP (sleep - used when can't distinguish sleep level), S4, S3, S2, S1, ?? (unknown) and xx is: ok, nc, cr, nr, uf, or ?? where: ok = OK (monitored parameters within normal operating ranges) nc = noncritical (warning: hardware outside normal operating range) cr = critical (fatal: hardware exceeding specified ratings) nr = nonrecoverable (potential damage: system hardware in jeopardy or damaged) uf = unspecified fault (fault detected, but severity unspecified) ?? = status not available/unknown (typically because system power is OFF) Activates the Intel OEM Terminal Mode extensions. This allows Intel OEM text commands to be entered without the 000157 text prefix. To enable the OEM commands this command must be executed every time a session is activated. Displays the 16-byte system GUID of the managed server. Output formatted similar to what is displayed by the DPCCLI command. Displays the network configuration of the BMC. Using the mac, ip, subnet or gateway parameters only display the requested information. Output formatted similar to what is displayed by the DPCCLI command. This only displays information for the primary OOB NIC. Causes the BMC to generate an IPMI diagnostic interrupt (NMI for IA32 systems).