HP LaserJet 5000 HP LaserJet 5000, 5000 N, 5000 GN, and 5000 DN Printers - Us - Page 165
Cfg Tcp/ip=no, Bootp=yes, Bootp=no, Cfg Etalk=no, Etalk Phase=1 Or 2
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
EIO Menu (Continued) Item Values CFG TCP/IP=NO NO YES CFG ETALK=NO NO YES Explanation NO: The TCP/IP Menu is not accessible. YES: The TCP/IP Menu appears. In the TCP/IP Menu, you can specify BOOTP=YES for TCP/IP parameters to be automatically loaded from a bootp or DHCP server when the printer is turned on. If you specify BOOTP=NO, you can manually set selected TCP/IP parameters from the control panel. You can manually set each byte of the IP address (IP), Subnet Mask (SM), Syslog Server (LG), and Default Gateway (GW). Also, you can manually set the Timeout time period. Note If no IP address is assigned within the first 5 minutes, the HP JetDirect print server card will assume a default IP address of 192.0.0.192. NO: The EtherTalk Menu is not accessible. YES: The EtherTalk Menu appears. In the EtherTalk Menu you can set the AppleTalk phase parameter (ETALK PHASE=1 or 2) for your network. EN Control Panel Menus B-19