HP LaserJet 5000 HP LaserJet 5000, 5000 N, 5000 GN, and 5000 DN Printers - Us - Page 94
Ram Disk Device
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Printer Messages (Continued) Message MEMORY SETTINGS CHANGED Explanation or Recommended Action The printer changed its memory settings because it did not have enough memory to use the previous settings for I/O Buffering and Resource Saving. This usually occurs after removing memory from the printer, adding a duplexer, or adding a printer language. You might want to change memory settings for I/O Buffering and Resource Saving (although default settings are usually best) or add more memory to the printer (page C-1). MEMORY SHORTAGE JOB CLEARED The printer did not have enough free memory to print the entire job. The remainder of the job will not print and will be cleared from memory. Press [Go] to continue. Change the Resource Saving setting from the printer's control panel (page C-6) or add more memory to the printer (page C-1). MEMORY SHORTAGE PAGE SIMPLIFIED The printer had to compress the job in order to fit it in available memory. Some data loss might have occurred. Press [Go] to continue. You might want to add more memory to the printer (page C-1). OFFLINE Press [Go] to place the printer online. PERFORM PRINTER MAINTENANCE To ensure optimum print quality, the printer prompts you to have routine maintenance performed every 150,000 pages. Contact an HP-authorized service or support provider to perform routine printer maintenance. (See the HP Support pages at the front of this user's guide.) RAM DISK DEVICE The RAM disk had a critical failure and can no longer be used. FAILURE Turn the printer off, and then turn the printer on to clear the message. RAM DISK FILE The requested operation could not be performed. You might have OPERATION FAILED attempted an illegal operation, such as trying to download a file to a non-existent directory. 82 Chapter 4: Problem Solving EN