HP LaserJet 5000 HP LaserJet 5000, 5000 N, 5000 GN, and 5000 DN Printers - Us - Page 80
paper access plates and wipe off, Using the green handles, lift - cleaning
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Cleaning the Printer Before beginning these steps, turn the printer off and unplug the power cord. 1 Open the top cover and remove the toner cartridge. WARNING! Avoid reaching too far into the printer. The adjacent fusing area might be hot! Caution To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. 2 Wipe any dust or dirt off the paper feed guides (shaded areas) with a dry, lint-free cloth. Note If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. (Hot water sets toner into fabric.) 3 Using the green handles, lift the paper access plates and wipe off any residue with a dry, lint-free cloth. 4 Close the paper access plates, replace the toner cartridge, close the top cover, plug in the power cord, and turn the printer on. 68 Chapter 3: Printer Maintenance EN