HP LaserJet 5000 HP LaserJet 5000, 5000 N, 5000 GN, and 5000 DN Printers - Us - Page 93

Printer Messages (Continued) Message FLASH IS WRITE PROTECTED Explanation or Recommended Action The flash disk DIMM is protected, and no new files can be written to it. Disable the write protection through HP JetAdmin. INPUT DEVICE CONDITION xx.yy An input paper handling device has a condition that needs attention before printing can resume. See the documentation that came with the paper handling device for assistance. INSTALL FRONT DUPLEX COVER The printer is unable to print the current job, because the duplexer's front cover is not installed, or not inserted correctly. Re-insert the duplexer's front cover. INSTALL TRAY x The printer is unable to print the current job, because the specified tray (x) is open or not inserted correctly. Re-insert the specified tray. LOADING PROGRAM alternates with DO NOT POWER OFF Programs and fonts can be stored on the printer's file system. At bootup time these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The specifies a sequence number indicating the current program being loaded. MANUALLY FEED [TYPE] [SIZE] Load the requested paper into Tray 1. Press [Go] if the desired paper is already loaded in Tray 1. Press [-Value+] to scroll through the available types and sizes. Press [Select] to accept the alternate type or size. MEMORY FULL STORED DATA LOST There is no available memory in the printer. The current job might not print correctly and some resources (such as downloaded fonts or macros) might have been deleted. You might want to add more memory to the printer (page C-1). EN Chapter 4: Problem Solving 81