HP LaserJet M1120 Service Manual - Page 107
CAUTION, Disconnect one FFC callout 5.
View all HP LaserJet M1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
5. Lift the laser/scanner cover up and out of the product to remove it. NOTE: When this cover is reinstalled, make sure that the slots in the lower portion of the cover (callout 4; one shown) fit over the edge of the laser/scanner mounting shelf so that the cover is secure and correctly fits inside the product. Figure 5-66 Remove the laser/scanner (4 of 7) 4 6. Disconnect one FFC (callout 5). CAUTION: Do not bend or fold the FFCs during the removal or reinstallation process. Figure 5-67 Remove the laser/scanner assembly (5 of 7) 5 ENWW Product base 91
5.
Lift the laser/scanner cover up and out of the product to remove it.
NOTE:
When this cover is reinstalled, make sure that the slots in the lower portion of the cover
(callout 4; one shown) fit over the edge of the laser/scanner mounting shelf so that the cover is
secure and correctly fits inside the product.
Figure 5-66
Remove the laser/scanner (4 of 7)
4
6.
Disconnect one FFC (callout 5).
CAUTION:
Do not bend or fold the FFCs during the removal or reinstallation process.
Figure 5-67
Remove the laser/scanner assembly (5 of 7)
5
ENWW
Product base
91