HP Latex 560 User Guide - Page 150
Stop refilling an intermediate tank, Cannot insert an ink cartridge or intermediate tank
View all HP Latex 560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
NOTE: Manual refilling of intermediate tanks should be performed when the printer is in Ready status and not performing any printing or maintenance operation. Stop refilling an intermediate tank If a large cartridge runs out of ink, and you want to continue printing using the remaining ink in the intermediate tank without replacing the large cartridge, press , then Stop refilling intermediate tank and select the color. The large cartridge will stop refilling the selected intermediate tank. Once the intermediate tank is completely empty, it must be replaced and cannot be used again. NOTE: In this mode, the printer does not use the 3 liter cartridge at all. The intermediate tank must be replaced by a genuine HP 831 cartridge of corresponding color, unaltered and containing more than 500 ml of ink. If this option is selected, the intermediate tank will be internally marked as 'stop refilling' and the status (see Check the status of the large ink cartridges on page 137) will be one of the following: ● Intermediate tanks won't be refillable anymore: You can continue printing while there is ink in the intermediate tank. ● Intermediate tank is empty: You need to replace the intermediate tank to continue printing as there is no ink. ● Intermediate tank error: An error has occurred and you need to replace the intermediate tank. Cannot insert an ink cartridge or intermediate tank 1. Check that you have the correct type of cartridge or tank (model number). 2. Check that the colored label on the cartridge or tank is the same color as the label on the slot. 3. Check that the cartridge or tank is correctly oriented, the arrow on its front should face upwards. CAUTION: Never clean inside the intermediate tank slots. 144 Chapter 6 Ink system ENWW