HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 104
config.zoning.addPortMem
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
CLI Commands config.zoning.addPortMem Syntax addPortMem "zoneName" domainId portNumber Purpose This command adds the domain ID and port number of a zone member to the specified zone in the work area. NOTE: Port numbers cannot be used for zone members if the interoperability mode for the Switch or Director is set to Open Fabric 1.0 mode. Description The CLI supports the number of zones members per zone specified for a given product. Parameters This command has three parameters: zoneName domainId Specifies the name of the zone. Specifies the domain ID of the member to be added to the zone. portNumber Valid values are in the range 1-31. Specifies the port number of the member to be added to the zone. Valid port number values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 0-127 and 132-144 for the Director 2/140 Command Example Root> config zoning addPortMem TheUltimateZone 10 6 2-74 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/104.png)