HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 169
Error 32: Invalid SNMP, The SNMP community
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Error Messages Message Error 31: Invalid Subnet Mask Error 32: Invalid SNMP Community Name Error 33: Invalid SNMP Trap Address Description The value entered for the new subnet mask for the Ethernet interface is invalid. The value entered for the SNMP community name is invalid. The value entered for the SNMP trap address is invalid. Action The subnet mask must be entered in dotted decimal format (for example, 255.0.0.0). Enter the subnet mask for the Ethernet interface in dotted decimal format. The SNMP community name is the name of the community specified in the config.snmp.addCom munity command. The community name must not exceed 32 characters. Valid characters include all those in the ISO Latin-1 character set. Duplicate community names are allowed, but the corresponding writeAuthorization values must match. Enter an SNMP community name that meets all of the requirements. The new SNMP trap address for the SNMP interface must be entered in dotted decimal format (for example, 10.0.0.0). Enter an SNMP trap address that meets the requirements. CLI reference guide for directors and edge switches A-5
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/169.png)