HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 135
show.frus
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
CLI Commands show.frus Syntax frus Purpose This command displays information about all FRUs. Parameters This command has no parameters. Command Example Root> show frus Output The FRU information is displayed as a table that includes the following properties: FRU The FRU name. • If a FRU is not installed on an Edge Switch 2/16, 2/32, or an Director 2/64, the output in this column is NotInstalled. Position State • If a FRU is not installed on a Edge Switch 2/24 or an Director 2/140, the output in this column is the name of the missing FRU or Unknown. The relative position of the FRU, that is, its slot. The state of the FRU. Values are: • Active-the current module is active. • Backup-this module is not currently being used, but it is available for immediate failover. Serial Num Part Num • Failed-the current module is failed. The serial number of the FRU. (This field is blank for the power supply modules of the Edge Switch 2/24.) The part number of the FRU. CLI reference guide for directors and edge switches 2-105
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/135.png)