HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 58
config.security.portBinding.bound, Syntax, Purpose, Parameters
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
CLI Commands config.security.portBinding config.security.portBinding.bound Syntax bound portNumber portBindingState Purpose This command sets the port binding state for a given port. Parameters This command has two parameters: portNumber Specifies the port number for which the port binding state is being set. Valid port number values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 portBindingState 0-127 and 132-144 for the Director 2/140 Specifies the port binding state as active or inactive. Valid values are true and false. true sets the port binding to active. The specified port will be bound to the WWN configured with the config.security.portBinding.wwn command. If no WWN has been configured, no devices can log in to that port. false sets the port binding to inactive. Any device is free to connect to the specified port in this state, regardless of the WWN setting. Boolean 1 and 0 may be substituted as values. 2-28 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/58.png)