HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 117
maint.system.resetConfig
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
CLI Commands maint.system.resetConfig Syntax resetConfig Purpose This command resets all NV-RAM configuration parameters to their default values, including feature keys and IP addresses. Description This command IPLs the Switch. Connection from the CLI to the Switch is lost when this command runs. NOTE: This command resets all configuration data and non-volatile settings, including network information, to their default values (factory settings). Management access may be lost until the network information is restored. The default values are set in the firmware of the Director or Edge Switch. For information about the default values, refer to the service manual for your Director or Edge Switch. Parameters This command has no parameters. Command Example Root> maint system resetConfig CLI reference guide for directors and edge switches 2-87