HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 144
show.port.config
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
CLI Commands show.port.config Syntax config Purpose This command shows the port configuration for all ports. Parameters This command has no parameters. Command Example Root> show port config Output The port configuration attributes are displayed as a table that includes the following properties: Port Name Blocked Ext Dist FAN Type Speed The port number. The name of the port as set in the config.port.name command. The blocked state of the port as set in the config.port.blocked command. The extended distance state as set in the config.port.extDist command. (This does not apply to the Edge Switch 2/24.) The configured fabric address notification (FAN) state. (Edge Switch 2/24 only.) The port type as set in the config.port.type command. The port speed as set in the config.port.speed command. 2-114 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/144.png)