HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 127
perf.link
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
CLI Commands perf.link Syntax link portNumber Purpose This command displays port link counters for a single ports. Parameters This command has one parameter: portNumber Specifies the port number. Valid values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 0-127 and 132-144 for the Director 2/140 Command Example Root> perf link 2 Output The port link counter data is displayed as a table that includes the following statistics. Port OLS In OLS Out Reset In Reset Out LIPS In The port number. The number of offline sequences initiated by the attached N_Port. The number of offline sequences initiated by this Director or Edge Switch port. The number of link resets initiated by the attached N_Port. The number of link resets initiated by this Director or Edge Switch. The number of LIPS generated on this Switch loop port. CLI reference guide for directors and edge switches 2-97