HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 61
Parameters, Command Example, Output, Output Example
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
CLI Commands Parameters This command has one parameter: portNumber Specifies the port number for which the port binding configuration will be shown. Valid values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 0-127 and 132-144 for the Director 2/140 Command Example Root> config security portBinding show 4 Output The port binding configuration date is displayed as a table that includes the following properties. Port Number WWN Binding Bound WWN The port number. The state of port binding for the specified port, either active or inactive. The WWN of the device that is bound to the specified port. If this field is blank, no device has been bound to the specified port. Output Example The output from the config.security.portBinding.show command displays as follows. Port Number: WWN Binding: Bound WWN: 4 Active AA:99:23:23:08:14:88:C1 CLI reference guide for directors and edge switches 2-31
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/61.png)