HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 60

CLI Commands boundWwn Specifies the WWN of the device that is being bound to the specified port. The value must be entered in colon-delimited hexidecimal notation (for example, 11:22:33:44:55:66:AA:BB). If the boundWwn is configured and the portBindState is: Active-only the device described by boundWwn will be able to connect to the specified port. Inactive-the WWN is retained, but any device can connect to the specified port. Instead of the WWN, either of two values can be entered in this parameter: attached automatically configures the currently attached device WWN as the bound WWN. remove changes the WWN to the default value, 00:00:00:00:00:00:00:00. Even though this removes the WWN-port association, if the portBindingState value set with the config.security.portBinding.bound command is still true (the port binding is active), other devices are prevented from logging in to this port. To allow other devices to log in to this port, use the config.security.portBinding.bound command to set the portBindingState parameter to false. Command Examples Root> config security portBinding wwn 4 AA:99:23:23:08:14:88:C1 Root> config security portBinding wwn 4 attached Root> config security portBinding wwn 4 remove config.security.portBinding.show Syntax show portNumber Purpose This command shows the port binding configuration for a single port. 2-30 CLI reference guide for directors and edge switches