HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 73
config.snmp.show, Syntax, Purpose, Parameters, Command Example, Output
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
CLI Commands config.snmp.show Syntax show Purpose This command shows the Switch SNMP configuration. Parameters This command has no parameters. Command Example Root> config snmp show Output The Switch configuration data is displayed as a table that includes the following properties. Authorization Traps Index Community Name writeAuth Trap Recipient UDP Port The state of the authorization traps (for example, enabled) that will be sent to SNMP management stations when unauthorized stations attempt to access SNMP information from the Switch. The community index number. The name of the community. The write authorization state. The address of the trap recipient. The user datagram protocol (UDP) port number to which the Director will send traps for each recipient. CLI reference guide for directors and edge switches 2-43
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/73.png)