HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 176

Error Messages Message Error 89: Not Allowed in S/390 Mode Without the SANtegrity™ Feature Description This procedure is not allowed in S/390 mode. Error 90: Invalid Port Type The configured port type is invalid. Error 91: E_Port Type Configured Ports cannot be configured as E_Ports in S/390 mode. Error 92: Not Allowed While Port Is Unblocked Error 93: Not Allowed While FICON MS Is Installed Error 94: Invalid Feature Combination Error 99: Preferred Domain ID Cannot Be Zero The port must be blocked to complete this request. This request cannot be completed because FICON Management Server is installed. The requested features cannot be installed at the same time on one Director or Edge Switch. This Switch cannot be configured to have a preferred domain ID equal to zero (0). Action The entered command is only supported when the product is in Open Systems mode. The product cannot be taken out of S/390 mode through the CLI. Use the HAFM application to change the product operating mode, and then reenter the command. The port may be configured as an E_Port, G_Port, or F_Port. Reconfigure the port, and then resubmit the command. Reconfigure the port as either an F_Port or a G_Port, and then resubmit the command. Block the port, and then resubmit the command. This action is not supported. No action necessary. Contact your sales representative. Enter an integer in the range 1-31 for the preferred domain ID. A-12 CLI reference guide for directors and edge switches