HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 56
config.security.fabricBinding.showActive, Syntax, Purpose, Parameters, Output, Output Example
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
CLI Commands config.security.fabricBinding.showActive Syntax showActive Purpose This command displays the fabric binding configuration saved on the fabric. It performs the same function as show.security.fabricBinding. Parameters This command has no parameters: Output This command displays the following fabric binding configuration data: Fabric Binding State Fabric Membership List The active fabric binding state: Inactive or Active Restricting The active fabric membership list. Output Example The output from the config.security.fabricBinding.showActive command displays as follows: Fabric Binding State: Active Restricting Domain 1 (00:11:22:33:44:55:66:77 Domain 2 (88:99:AA:BB:CC:DD:EE:FF) Domain 14 (11:55:35:45:24:78:98:FA) config.security.fabricBinding.showPending Syntax showPending Purpose This command displays the fabric binding configuration in the pending working area and has not yet been activated to the fabric. If no changes have been made to the pending environment, the CLI displays the Active membership list. 2-26 CLI reference guide for directors and edge switches