HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 129
perf.traffic
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
CLI Commands perf.traffic Syntax traffic portNumber Purpose This command displays port traffic counters for a single port. Parameters This command has one parameter: portNumber Specifies the port number. Valid values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 0-127 and 132-144 for the Director 2/140 Command Example Root> perf traffic 2 Output The port traffic counter data is displayed as a table that includes the following statistics, along with a wrap count for each corresponding counter. Port Rx% Tx% RxFrames TxFrames The port number. The received link utilization percentage. The transmitted link utilization percentage. The number of Fibre Channel Class 2 and Class 3 frames that the port has received. The number of Fibre Channel Class 2 and Class 3 frames that the port has transmitted. CLI reference guide for directors and edge switches 2-99
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/129.png)