HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 142
show.nameServerExt
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
CLI Commands show.nameServerExt Syntax nameServerExt Purpose This command displays extended information from the name server database for devices attached to this Switch. The command provides symbolic nameserver information, as well as the same information as the show.nameServer command. Multiple devices per port are possible for any public loop device attached to an FL Port. NOTE: Because it contains symbolic nameserver information that can be lengthy, the CLI output wraps several times per node. For this reason, this command is supported only in comma-delimited mode. Parameters This command has no parameters. Command Example Root> show nameServerExt Output The device information data is displayed as a table that includes the following properties: Type Port Id Port Name Node Name COS FC4 Types The type (N, NL, F/NL, F, FL, E, B). The 24-bit Fibre Channel address. The port World Wide Name of the attached device. The node World Wide Name of the attached device. The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3). The FC4 types registered for this device. One or more numbers display in this field. The numbers in this field correspond to the list in the output example for show.nameServer on page 2-110. 2-112 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/142.png)