HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 64
Parameters, Command Examples, config.security.switchBinding.show, Syntax, Purpose
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CLI Commands Parameters This command has one parameter: switchBindingState Sets the Switch binding state for the Switch. Valid values are: disable - Disable Switch binding. Devices (servers, storage, and other Switches) are allowed to connect to the Switch without restrictions. eRestrict - Enable Switch binding and restrict E_Port connections. E_Ports are prevented from forming ISL connections unless explicitly identified in the Switch membership list. F_Port connections are allowed without restriction. fRestrict - Enable Switch binding and restrict F_Port connections. Server and (or) storage devices are prevented from forming F_Port connections with the Switch unless explicitly identified in the Switch membership list. E_Ports are allowed to form ISL connections without restriction. allRestrict - Enable Switch binding and restrict E_Port and F_Port connections. Both E_Ports and F_Ports prohibit connections with all devices unless explicitly identified in the Switch membership list. Command Examples Root> config security switchBinding setState allRestrict config.security.switchBinding.show Syntax show Purpose This command displays the Switch binding configuration. Parameters This command has no parameters. 2-34 CLI reference guide for directors and edge switches