HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 53
Purpose, Parameters, Command Examples, config.security.fabricBinding.clearMemList, Syntax
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
CLI Commands Purpose This command adds a new member to the Fabric Member List in the pending fabric binding work area. The number of entries is limited to the maximum available domain ID's for the fabric (31). NOTE: Changes from this command are not activated to the fabric until the activatePending command is issued. Parameters This command has two parameters: wwn domainId Specifies the World Wide Name (WWN) of the member to be added to the fabric membership list. The value of the WWN must be in colon-delimited hexadecimal notation (for example, AA:00:AA:00:AA:00:AA:00). The domain ID of the member to be added to the fabric membership list. Valid domain ID's range from 1 to 31. Command Examples Root> config security fabricBinding addMember AA:99:23:23:08:14:88:C1 2 config.security.fabricBinding.clearMemList Syntax clearMemList Purpose This command clears the fabric membership list for the pending fabric binding working area. NOTE: This information is not saved to the fabric until the activatePending command is issued. When the list is cleared, the CLI automatically adds the managed Switch to the fabric membership list. Parameters This command has no parameters: CLI reference guide for directors and edge switches 2-23
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/53.png)