HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 48
Syntax, Purpose, Description, Parameters
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
CLI Commands config.port.type Syntax type portNumber portType Purpose This command sets the allowed type for a port. Description A port can be configured as an F_Port, an E_Port, or a G_Port. On an Edge Switch 2/24, a port can also be an Fx_Port or Gx_Port. The port configurations function as follows: • F_Port-cannot be used as an interswitch link, but may attach to a device with an N_Port. • E_Port-only other Switch may attach to this type of port. • G_Port-either a device or another Switch may attach to this type of port. • Fx_Port - allows Arbitrated Loop operation in addition to the functionality of an F_Port. (Edge Switch 2/24 only.) • Gx_Port-allows Arbitrated Loop operation in addition to the functionality of an F_Port or an E_Port. (Edge Switch 2/24 only.) Parameters This command has two required parameters: portNumber Specifies the port number. Valid values are: 0-15 for the Edge Switch 2/16 0-23 for the Edge Switch 2/24 0-31 for the Edge Switch 2/32 0-63 for the Director 2/64 0-127 and 132-144 for the Director 2/140 2-18 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/48.png)