HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 55
Parameters, Command Examples, config.security.fabricBinding.setState, Syntax, Purpose, inactive
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
CLI Commands Parameters This command has no parameters: Command Examples Root> config security fabricBinding replacePending config.security.fabricBinding.setState Syntax setState fabricBindingState Purpose This command sets the fabric binding state for the pending fabric binding configuration work area. NOTE: This state is not saved to the fabric until the activatePending command is issued. Parameters This command has one parameter: fabricBindingState Specifies the fabric binding state for the pending fabric binding configuration work area. Valid values are: inactive - Deactivates fabric binding. Switches and Directors are allowed to join the fabric without restriction. The fabric membership list is empty in this state, and as such, the fabric membership list is cleared when this state is requested. restrict - Activates fabric binding and restricts connections. Only Switches identified in the fabric membership list may join the fabric in this state. The fabric membership list is automatically populated with devices attached prior to activation, but all new members must be manually added before connecting. The Switch must be online to complete this request. Command Examples Root> config security fabricBinding setstate restrict CLI reference guide for directors and edge switches 2-25
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/55.png)