HP StorageWorks 2/140 CLI reference guide for directors and edge switches - Page 178
config.security.fabricBin, ding on Speed Not 2 Gb/sec
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Error Messages Message Error 119: Switch Speed Not 2 Gb/sec Error 134: Invalid Membership List Error 135: Invalid Number of Fabric Membership List Entries Error 136: Invalid Number of Switch Membership List Entries Error 137: Invalid Fabric Binding State Description This request cannot be completed because the Switch speed has no been set to 2 Gbps. Generic message to indicate a problem in either the Switch binding or fabric binding membership list The number of fabric members submitted exceeds the maximum allowable entries of 31. The number of Switch members submitted exceeds the maximum allowable entries of 256. The fabric binding state submitted is not recognized by the CLI. Action The Switch speed must be set to 2 Gbps in order to accommodate a port speed of 2 Gbps. Update the Switch speed and resubmit the request. Be sure that the membership list submitted does not isolate a Switch already in the fabric. If this is not the case, the user needs to be aware of all fabric security rules and make sure that the list submitted adheres appropriately. The number of entries in the fabric membership list is limited to the total number of domain ID's available to the fabric. Make sure that the list (including the managed Switch) contains no more than 31 entries. The number of entries in the Switch membership list is limited to 256. Make sure that the list (including the managed Switch) contains no more than 256 entries. The fabric binding state must be set to either inactive or restrict. For more information, see config.security.fabricBin ding on page 2-22. A-14 CLI reference guide for directors and edge switches
![](/manual_guide/products/hewlettpackard-316095b21-cli-reference-guide-directors-edge-switches-4b9015e/178.png)