HP XM600 hp kayak xm600 series 2, user's guide for desktop models - Page 22
Removing and Replacing the Cover and Front Bezel, Removing the Cover
 |
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation Removing and Replacing the Cover and Front Bezel Removing and Replacing the Cover and Front Bezel Removing the Cover For your own safety, it is recommended that you first read the warning notices on pages 6 and 7. 1 Switch off the monitor and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 If necessary, unlock the cover using the key on the front panel. 3 Unscrew the thumb screw — at the back of the PC. 4 Push the two release latches inwards. 5 Slide the cover towards the rear of the PC Workstation until it stops, then lift off the PC chassis. ™ š ™ 22
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26 -
27 -
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
 |
 |
2
Installing and Replacing Hardware Parts in Your PC Workstation
Removing and Replacing the Cover and Front Bezel
22
Removing and Replacing the Cover and Front Bezel
Removing the Cover
For your own safety, it is recommended that you first read the warning
notices on pages 6 and 7.
1
Switch off the monitor and PC Workstation. Disconnect all power cables
and any LAN or telecommunications cables.
2
If necessary, unlock the
cover using the key on the
front panel.
3
Unscrew the thumb screw
at the back of the PC.
4
Push the two release
latches inwards.
5
Slide the cover towards the
rear of the PC Workstation
until it stops, then lift off
the PC chassis.
±