HP XM600 hp kayak xm600 series 2, user's guide for desktop models - Page 44

Replacing the Power Supply Unit, Removing the, Power Supply Unit, Installing the Power, Supply Unit

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

2 Installing and Replacing Hardware Parts in Your PC Workstation Replacing the Power Supply Unit Replacing the Power Supply Unit WARNING Removing the Power Supply Unit Hewlett-Packard does not support power supply upgrades. This information is provided to help you replace a defective power supply unit. For your safety, only replace a power supply unit with a unit provided by HP support services. 1 Switch off the display and PC Workstation. Disconnect all power cables and any LAN or telecommunications cables. 2 Remove the PC Workstation's cover (refer to page 22 for instructions). 3 Remove all internal power supply connectors. 4 Remove the two screws located on the rear of the chassis that secure the power supply unit in position. Installing the Power Supply Unit 5 Lift the front of the power supply unit up and move it forwards to disengage the hinge on the rear. 1 Insert the new power supply unit. 2 Secure it in position using the screws you previously removed. 3 Reconnect all internal power supply connectors. 4 Replace the PC Workstation's cover (refer to page 23). Reconnect all the power and telecommunications cables. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
2
Installing and Replacing Hardware Parts in Your PC Workstation
Replacing the Power Supply Unit
44
Replacing the Power Supply Unit
WARNING
Hewlett-Packard does not support power supply upgrades. This
information is provided to help you replace a defective power supply
unit. For your safety, only replace a power supply unit with a unit
provided by HP support services.
Removing the
Power Supply Unit
1
Switch off the display and PC Workstation. Disconnect all power cables
and any LAN or telecommunications cables.
2
Remove the PC Workstation’s cover (refer to page 22 for instructions).
3
Remove
all
internal power supply connectors.
4
Remove the two screws located on the rear of the chassis that secure the
power supply unit in position.
5
Lift the front of the power supply unit up and move it forwards to
disengage the hinge on the rear.
Installing the Power
Supply Unit
1
Insert the new power supply unit.
2
Secure it in position using the screws you previously removed.
3
Reconnect
all
internal power supply connectors.
4
Replace the PC Workstation’s cover (refer to page 23). Reconnect all the
power and telecommunications cables.