HP XM600 hp kayak xm600 series 2, user's guide for desktop models - Page 47
System Board Switches, Switch, Default Position, To Con Do Not change Default Settings
View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2 Installing and Replacing Hardware Parts in Your PC Workstation System Board Switches System Board Switches There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure. Switch Default Position To Configure: 1-5 OFF Reserved. Do Not change Default Settings 6 ON Enables keyboard power-on. OFF disables this option. 7 OFF Enables normal modes. ON enables the BIOS recovery mode at next boot. 8 OFF Retains CMOS memory. ON clears CMOS memory at next boot. 9 OFF Enables User and System Administrator passwords. ON clears the passwords at next boot. 10 OFF Selects the chassis type. OFF = desktop Location of system board switches 47