HP Xw9300 HP xw9300 Service and Technical Reference Guide - Page 147
Start > Explore, File > Properties >, Tools, Check Now, Spacebar, Storage > Boot Order
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
System Diagnostics and Troubleshooting Table 5-25 Diskette Problems (continued) Problem Cause Solution Cannot format diskette. Invalid media reported. When formatting a disk in MS-DOS, you might need to specify diskette capacity. For example, to format a 1.44-MB diskette, enter the following command at the MS-DOS prompt: FORMAT A: /F:1440 A problem has occurred with a disk transaction. The directory structure is bad, In Windows, right-click Start > Explore, or there is a problem with a and select a drive. Select File > Properties > file. Tools. Under Error-checking, click Check Now. Diskette drive cannot read a diskette. Diskette is not formatted. Format the diskette. You are using the wrong diskette type for the drive type. Check the type of drive that you are using and use the correct diskette type. You are reading the wrong Check the drive letter in the path statement. drive. Diskette is damaged. Replace the diskette with a new one. "Invalid system disk" message is displayed. A diskette that does not When drive activity stops, remove the diskette and contain the system files press the Spacebar. The workstation should start needed to start the up. workstation has been inserted in the drive. Diskette error has occurred. Restart the workstation by pressing the power button. Cannot Boot from Diskette. Diskette is not bootable. Replace with a bootable diskette. Diskette boot has been Run Computer Setup and enable diskette boot in disabled in Computer Setup. Storage > Boot Order. Removable media boot has been disabled in Computer Setup. Run Computer Setup and enable Removable Media Boot in Storage > Storage Options. Troubleshooting Scenarios and Solutions 147