HP dx7200 HP Compaq Business PC dx7200 MT Service Reference Guide, 1st edition - Page 76
Access Panel
View all HP dx7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis 6.3 Access Panel 1. Prepare the computer for disassembly (Section 6.1). Ä CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet. 2. Loosen the captive thumbscrew 1 that secures the access panel to the computer chassis. 3. Slide the access panel 2 back about 1 inch (2.5 cm), then lift it off the unit. ✎ You may want to lay the computer on its side to install internal parts. Be sure the side with the access panel and pull grip is facing up. To install the access panel, reverse the removal procedure. 6-4 390812-001 Service Reference Guide, dx7200
6–4
390812-001
Service Reference Guide, dx7200
Removal and Replacement Procedures— Microtower (MT) Chassis
6.3 Access Panel
1. Prepare the computer for disassembly (
Section 6.1
).
Ä
CAUTION:
Before removing the computer access panel, ensure that the computer is turned off and that
the power cord is disconnected from the electrical outlet.
2. Loosen the captive thumbscrew
1
that secures the access panel to the computer chassis.
3. Slide the access panel
2
back about 1 inch (2.5 cm), then lift it off the unit.
✎
You may want to lay the computer on its side to install internal parts. Be sure the side with the
access panel and pull grip is facing up.
To install the access panel, reverse the removal procedure.