HP dx7200 HP Compaq Business PC dx7200 MT Service Reference Guide, 1st edition - Page 85
If not replacing the old expansion card with a new expansion card, install an expansion slot - pci express x16
View all HP dx7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Removal and Replacement Procedures- Microtower (MT) Chassis c. If removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket then away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape the card against the other components. 5. If not replacing the old expansion card with a new expansion card, install an expansion slot cover to close the open slot. Insert the metal slot cover in the opened slot and slide the slot cover lock down to secure the slot cover in place. Ä CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. Service Reference Guide, dx7200 390812-001 6-13