Honeywell NX4S1 Installation Guide - Page 14
Underwriters Laboratories Incorporated
View all Honeywell NX4S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
NetAXS™ NX4S1 Installation Notices 1.6 Underwriters Laboratories Incorporated The NetAXS™ panel was reviewed by Underwriters Laboratories Incorporated for Access Control System Units - Category ALVY, UL294 standard. The NetAXS™ panel was reviewed as a stand alone system. The input points only monitor the door position. The NetAXS™ panel is not intended as a Proprietary Alarm Unit - Category APOU, UL1076 standard. The NetAXS™ panel was reviewed using the following Honeywell readers: OmniAssure (TM) OT30, OmniClass (TM) OM40 and OM55, and OmniProx (TM) OP30 and OP40. Notes: • All field wiring, except the battery backup/charger wiring, is Class 2 power-limited. • UL has not evaluated communication with panels that are not NetAXS™ panels. • Underwriters Laboratories (UL) has reviewed only the configurations shown in "RS-485 Connection via PCI-2" on page 26, "RS-485 Connection via NetAXS™" on page 27, and "RS-232 Connection" on page 30 of this guide. Because UL has reviewed the NetAXS™ panel only as a standalone system, the computer terminal, NetAXS™ gateway panel, and N-485_PCI-2 adapter appear in these sections only to illustrate the installation and programming of the NetAXS™ panel. • UL has not evaluated the compatibility of downstream I/O devices (see "Downstream I/O" on page 23) with the NetAXS™ panel. 4 www.honeywell.com