IBM RS6000 Service Guide - Page 246
Battery, Removal
View all IBM RS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
Battery CAUTION: A lithium battery can cause fire, explosion, or a severe burn. Do not recharge, disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate, or expose cell contents to water. Keep away from children. Replace only with the part number specified for your system. Use of another battery may present a risk of fire or explosion. The battery connector is polarized; do not attempt to reverse polarity. Dispose of the battery according to local regulations. Removal 1. If you have not already done so, remove the covers as described in "Covers" on page 6-3. 2. Remove the I/O planar cover as described on page 6-8. 3. Locate the battery on the I/O planar. 6-38 Service Guide
Battery
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate, or
expose cell contents to water.
Keep away from children. Replace only with the
part number specified for your system. Use of another battery may present a
risk of fire or explosion.
The battery connector is polarized; do not attempt to reverse polarity.
Dispose of the battery according to local regulations.
Removal
1. If you have not already done so, remove the covers as described in “Covers” on
page 6-3.
2. Remove the I/O planar cover as described on page 6-8.
3. Locate the battery on the I/O planar.
6-38
Service Guide