IBM RS6000 Service Guide - Page 54

Step 1540-7 1. Turn the power off. 2. Reconnect the system console. Notes: a. If an ASCII terminal has been defined as the system console, attach the ASCII terminal cable to the to the S1 connector on the rear of the system unit. Also connect the internal serial and Ethernet cables to the I/O planar. b. If a display attached to a display adapter has been defined as the system console, install the display adapter and connect the display to it. Plug the keyboard into the keyboard connector on the rear of the system unit. 3. Turn the power on. 4. If the ASCII terminal or graphics display (including display adapter) are connected differently than before, the Console Selection screen appears and requires that a new console be selected. 5. When the keyboard indicator is displayed, press the F1 key on the directly attached keyboard or the number 1 key on an ASCII terminal. This triggers the SMS. 6. Enter the appropriate password when prompted to do so. 7. Wait until the SMS screen is displayed or the system appears to stop. 2-24 Service Guide