IBM RS6000 Service Guide - Page 79

Table 3-1 (Page 6 of 24). Firmware Error Codes. Error Code Description 25010xxx Flash Update Problem 25010000 No diskette in drive. 25010001 Diskette seek error. 25010002 25010003 Diskette in drive does not contain an *.IMG file. Cannot open OPENPROM package. 25010004 Cannot find OPENPROM node. 25010006 25010007 25010008 System id does not match image system id. Image has bad CRC. Flash is write protected, update cancelled. 25010009 2501000A Flash module is unsupported or not recognized. Flash write protected. 25A0xxx0 L2 Cache controller problem. 25A0xxx1 L2 Cache controller problem. 25A1xxx1 L2 SRAM failure Action / Possible Failing FRU Insert diskette containing firmware image. 1. Retry function. 2. Replace diskette drive. 3. Replace diskette cable. 4. Replace I/O board. (See notes on 3-1.) Insert diskette with firmware update file. Replace I/O board. (See notes on 3-1.) Replace I/O board. (See notes on 3-1.) Make sure correct firmware update diskette is being used with this system. Replace firmware updated diskette. 1. Turn off, turn on system unit and retry. 2. Replace I/O board. (See notes on 3-1.) Make sure correct firmware update diskette is being used with this system. 1. Turn off, turn on system unit, retry. 2. Replace I/O board. (See notes on 3-1.) 1. Replace the CPU card. 2. Replace the System board. See error code 2B2xxx22 for xxx definitions. 1. Replace the CPU card. 2. Replace the System board. See error code 2B2xxx22 for xxx definitions. Replace the CPU card. See error code 2B2xxx22 for xxx definitions. Chapter 3. Error Code to FRU Index 3-7