IBM RS6000 Service Guide - Page 291
Reboot/Restart Policy Setup Menu, Power-on System, Power-off System, Read VPD, Read VPD Image
View all IBM RS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
- Ring Indicate Power-On may be set to 'Enabled' or 'Disabled'. - Number of Rings may be set to any number from 1 to 255. Reboot/Restart Policy Setup Menu, see "Reboot/Restart Policy Setup Menu" on page B-23. Power-on System Lets you power-on the system immediately. For other power-on methods see "System Power-On Methods" on page B-26. Power-off System Allows the user to power-off the server following a surveillance failure. SYSTEM INFORMATION MENU SYSTEM INFORMATION MENU 1. Read VPD 2. Read VPD Image from Last System Boot 3. Read Progress Indicators from Last System Boot 4. Read Service Processor Error Logs 5. Read System POST Errors 6. Read NVRAM 7. View System Environmental Conditions 98. Return to Previous Menu 99. Exit from Menus Read VPD Displays manufacturer's vital product data, such as serial numbers, part numbers, etc. Read VPD Image from Last System Boot Displays the VPD information that was in effect after the last system boot. This information will usually be identical with the results from the menu selection "Read VPD," but in the case of configuration updates or certain faults, this Appendix B. Service Processor Menus B-13