IBM RS6000 Service Guide - Page 61

Step 1540-12 1. Follow the instructions on the screen to select the system console. 2. When the DIAGNOSTIC OPERATING INSTRUCTIONS screen is displayed, press Enter. 3. If the terminal type has not been defined, you must use the Initial Terminal option on the FUNCTION SELECTION menu to initialize the AIX operating system environment before you can continue with the diagnostics. This is a separate and different operation than selecting the console. 4. Select Task Selection. 5. When the NEW RESOURCE screen displays select an option from the bottom of the screen. Note: Adapters or devices that require supplemental media are not shown in the new resource list. If the system has adapters or devices that require a supplemental media, select option 1. If the adapter or device requires supplemental media select Process Supplemental Media from the TASKS SELECTION LIST. Follow the instructions on the screen after testing the adapters and devices listed on the NEW RESOURCE screen. Supplemental media must be loaded and processed one at a time. 6. Select Run Diagnostics from the TASK SELECTION LIST. 7. Select All Resources or the Adapter/Device you loaded from the supplemental media. Did you get an SRN? NO Go to "Step 1540-14" on page 2-33. YES Go to "Step 1540-13" on page 2-32. Chapter 2. Maintenance Analysis Procedures 2-31