IBM RS6000 Service Guide - Page 43
RS/6000 Diagnostic Information for Multiple Bus Systems - power supply diagnostics
View all IBM RS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Step 1520-1 You may be directed to this MAP for several reasons: 1. There is no indication of activity when the start/stop switch is pressed. None of the LEDs light and none of the fans, including the fan in the power supply, start to turn. Go to "Step 1520-2." 2. When the start/stop switch is pressed, the system begins to power on, but the power LED does not stay on. Go to "Step 1520-3" on page 2-14. Step 1520-2 1. Turn the power off. 2. Check that the external power cable to the system unit has continuity. 3. Check that the power outlet has been wired correctly with the correct voltage. 4. Check that the external power cable is plugged into both the system unit and the power outlet. Did you find a problem? NO Go to "Step 1520-3" on page 2-14. YES Correct the problem. Go to "MAP 410: Repair Checkout" in the IBM RS/6000 Diagnostic Information for Multiple Bus Systems. Chapter 2. Maintenance Analysis Procedures 2-13