Intel SS4000-E User Guide - Page 114

Protecting Local Disks Replacing Your Existing License To replace your existing license: 1. From the Action menu, click License > Add License. The Add License dialog box displays your current license key code. 2. In the License key code text box, enter the new key code. 3. Click OK. 4. When the confirmation message displays, click OK. If your computer has an Internet connection, the license is activated automatically. If your Internet connection is temporarily down, your license is activated automatically the next time you run Intel® Client Backup and Recovery with a restored Internet connection. If this computer does not have an Internet connection, you must perform an offline activation as described in the previous section. Protecting Your Disks After you install Intel® Client Backup and Recovery and restart your computer, the Protect a Disk wizard runs automatically. Using this wizard, you can specify which disk or partition you want to back up, where the backups should be stored, when automatic backups, if any, should occur, and what password you want to use for the recovery CD or booting remotely. If you cancel this wizard, you can start it again at any time using the following procedure. Before you protect a disk, it is recommended that you confirm that sufficient space is available on the storage system. At least an additional 20% of the disk size is required for changed data. For example, if the disk you want to protect is 15 GB, at least 18 GB of space must be available on the storage system. The Home page in the Manager, described in "Navigating the Manager" on page 28, displays the amount of available space. To protect a disk: 1. Click Protect a Disk. The Protect a Disk wizard runs. 2. In the Available disks list, select the disk or partition you want to protect. 98 Intel® Entry Storage System SS4000-E User Guide