Intel SS4000-E User Guide - Page 34

Getting Started 6. If you agree to the terms of the license agreement, click Yes. 7. Enter your name and company name and then click Next. 8. Click Next to install the Console in the displayed location, or click Browse to select or specify a different location and then click Next. 9. Review your selections and click Next. 10. .If you want to start the Console immediately after it is installed, click the Launch Storage System Console check box. Click Finish. Starting the Console Note: If the storage system is not directly connected to your computer and your network does not have a DHCP server, you must change the IP address of your computer to use the same subnet as the storage system. You can change it back after you configure the storage system. To do this, access your local area network (LAN) properties. For example, you might right-click My Network Places and click Properties, and then right-click your network connection and click Properties. In the list, select Internet Protocol (TCP/IP) and click Properties. The IP address can be any address beginning with 192.168.0 except 192.168.0.101, since that's the IP address used by the storage system. The subnet mask must be 255.255.255.0. Then click OK to close each open dialog box. When you configure the storage system, as described in "Configuring Your Storage System" on page 21, you can specify the IP address you want the storage system to use. If the IP address of the storage system is in a different subnet than your computer, you must specify the gateway, as described in "Changing the Network Settings" on page 68. This ensures that you can manage the storage system from any computer using a Web browser, as described in "Accessing the Manager" on page 25. Then you can change your computer's IP address back to its original setting. 18 Intel® Entry Storage System SS4000-E User Guide