Intel SS4000-E User Guide - Page 28
Rear View of SATA Hard Disk, Installing the Hard Disk into Drive Carrier - move disks to another
UPC - 735858182652
View all Intel SS4000-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Getting Started 5. Remove the hard disk from its wrapper and place it on an anti-static surface. Make sure the hard disk is a SATA hard disk. It should have a rear SATA connector similar to the following figure. AF000306 Figure 6. Rear View of SATA Hard Disk 6. With the hard disk circuit-side down, position the connector end of the hard disk so it faces the rear of the drive carrier. Align the holes in the hard disk to the holes in the drive carrier and attach the hard disk to the carrier with the screws removed in Step 4. Note: Do not remove the side rail on the right side of the drive carrier. This rail contains the light pipe that displays the LED light on the front of the drive carrier. If the side rail comes loose, ensure the light pipe is properly inserted into the LED hole before reattaching the side rail to the drive carrier. TP00929 Figure 7. Installing the Hard Disk into Drive Carrier 12 Intel® Entry Storage System SS4000-E User Guide