Intel SS4000-E User Guide - Page 35

Getting Started To start the console: 1. Click Start > Programs > Storage System Console. As soon as you start the Console, it scans the network for storage systems. This might take a few minutes. When the scan is complete, the left pane displays a tree view of all the storage systems it found. Each storage system has two ports for connecting to the network. If your storage system uses both ports, two items display in the tree in the left pane, each using the same name. You can identify the IP address used by each port by clicking each item in the tree and observing the IP address area in the right pane. Note: If you connect a storage system to the network after the Console already scanned it, or if you subsequently change the IP address of the storage system, you must click Discover Storage Systems to scan the network again and update the tree in the left pane. If no storage system displays in the left pane, your computer might not be in the same subnet as the storage system. Be sure to install the Console on a computer in the same subnet as the storage system and try again. 2. In the left pane, select the name of the storage system that you want to access, such as Storage, and then click Log On Storage System Manager. If your storage system uses both available ports to connect to the network, you can select either item. 3. If your storage system is not initialized, the System Initialization page displays. For more information, see the next section, "Initializing the Disks." If your storage system is initialized but not configured, the welcome page for the System Setup Wizard displays. For more information, see "Configuring Your Storage System" on page 21. If your storage system is initialized and configured, the login page for the Manager displays. For more information, see "Logging in to the Manager" on page 27. Intel® Entry Storage System SS4000-E User Guide 19