Kenwood DNX875S User Manual

Kenwood DNX875S Manual

Get Kenwood DNX875S PDF manuals and user guides View all Kenwood DNX875S manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DNX875S manual content summary:

  • Kenwood DNX875S | User Manual - Page 1
    DNX995S DNX875S GPS NAVIGATION SYSTEM INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . • The Instruction manual is subject to change for modification of specifications and so forth. Be
  • Kenwood DNX875S | User Manual - Page 2
     Contents Before Use 4 Precautions 4 Safety Precautions and Important Information 5 How to read this manual 6 Basic Operations 7 Functions of the Buttons on the Front Panel.... 7 Turning on the Unit 8 Initial Settings 9 Adjusting the volume 10 Monitor Angle Control 10 Touch
  • Kenwood DNX875S | User Manual - Page 3
    Battery Installation 88 Functions of the Remote control Buttons........88 Connection/Installation 91 Before Installation 91 Installing the unit 93 Troubleshooting 99 Problems and Solutions 99 Error Messages 99 Appendix 101 Playable Media and Files 101 Region Codes in the World 103
  • Kenwood DNX875S | User Manual - Page 4
    your KENWOOD dealer to make sure that they work with your model and in your area. • You can select a language to display menus, audio file tags, etc. See User Interface Setup (P.76). • The Radio Data System or Radio Broadcast Data System feature won't work in areas where the service is not supported
  • Kenwood DNX875S | User Manual - Page 5
    and performance. For best results while pairing with your Kenwood receiver, please be KENWOOD Car Navigation System and follow the instructions in this manual. Neither KENWOOD nor Garmin shall be liable for problems or accidents resulting from failure to observe the instructions in this manual
  • Kenwood DNX875S | User Manual - Page 6
    . In some countries, complete and accurate map information is either not available or is prohibitively expensive. How to read this manual • The screens and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the
  • Kenwood DNX875S | User Manual - Page 7
    Basic Operations Functions of the Buttons on the Front Panel Basic Operations 8 9 12 3 4 5 67 NOTE • The panels shown in this guide are examples used to provide a clear explanation of operations. For this reason, they may be different from the actual panels. Number 1 2 3 Name Remote Sensor S,
  • Kenwood DNX875S | User Manual - Page 8
    files in the card. * • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system. * If the map update file remains in the SD card, you cannot play audio/visual files. * Do not pull out the MAP SD while "Loading Maps
  • Kenwood DNX875S | User Manual - Page 9
    [Camera]. 2 Set each item and touch [ ]. For details of, see Camera Setup (P.71). ■■[OEM SETUP] This function requires a commercial adaptor. Consult your KENWOOD dealer for details. ■■ [DEMO] Set the demonstration mode. Default is "ON". 1 Touch [DEMO] and select ON or OFF. 2 Touch [Finish]. NOTE
  • Kenwood DNX875S | User Manual - Page 10
    ): Synchronizes the clock time with navigation GPS data. [Manual]: Set the clock manually. ■■[Time Zone] If you have selected [Manual] for Clock, select the time zone. ■■[Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.77) ■■[Off Position] You can store the
  • Kenwood DNX875S | User Manual - Page 11
    Touch screen operations To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display a setting menu screen or change pages. ●●Touch Touch the screen gently to select an item on the screen. ●●Touch and hold Touch the screen and keep your finger in
  • Kenwood DNX875S | User Manual - Page 12
    Basic Operations Popup menu 1 Press the [MENU] button. hhPopup menu appears. 2 Touch to display the popup menu. Source selection screen description You can display icons of all playback sources and options on the source selection screen. 1 2 3 1 The contents of the menu are as follows. •
  • Kenwood DNX875S | User Manual - Page 13
    • Displays the Hands Free screen. (P.65) When connecting as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. • Switches to the HD Radio broadcast. (P.42) • Switches to the SiriusXM® satellite radio broadcast. (P.48) • Plays a Bluetooth audio player. (P.60
  • Kenwood DNX875S | User Manual - Page 14
    Basic Operations Customize Short-cut buttons on HOME screen You can arrange the positions of the source icons as you like. 1 Press the [HOME] button. hhHOME screen appears. 2 Touch [ ]. 3 Touch and hold the icon which you want to move in the customizing mode. 4 Drag the icon to the desired position.
  • Kenwood DNX875S | User Manual - Page 15
    4 • Connected Bluetooth device information. • : Lights up during quick charging of the battery of the connected iPod/ iPhone/ Smartphone. 5 Artwork & information You can select whether to display an artwork and song information or only song information in more detail. Basic Operations List
  • Kenwood DNX875S | User Manual - Page 16
    , please refer to the Navigation Instruction Manual. Display the navigation screen 1 the latest version of the Owner's Manual from http://manual. kenwood.com/edition/im396/ 2 Enter your a magenta line. As you travel, your navigation system guides you to your destination with voice prompts, arrows on
  • Kenwood DNX875S | User Manual - Page 17
    touch [ ]. 2 Touch [ ]. ■■Manually avoiding traffic on your route 1 From the KENWOOD Traffic Powered By INRIX" application. ■■Updating maps You can purchase updated map data from Garmin. 1 Go to www.garmin.com/kenwood. 2 From the Map Updates section, select Update 3 Follow the on-screen instructions
  • Kenwood DNX875S | User Manual - Page 18
    the navigation and control keys of the current source. Returns to the full navigation screen. NOTE • For details on control keys, refer to the instructions in each section. • Touching the source icon at the bottom of the screen displays the full audio screen. During video playback, touching the
  • Kenwood DNX875S | User Manual - Page 19
    the volume for voice guidance of the navigation system. Default is "24". Basic Operations KENWOOD Traffic Powered By INRIX You can receive INRIX traffic information and weather forecast by connecting and then an icon of your desired content. For details, see Navigation system manual. English 19
  • Kenwood DNX875S | User Manual - Page 20
    Weather Widget You can display the weather forecast of the present location on the Home screen. Preparation • See KENWOOD Traffic Powered By INRIX (P.19). • Select "ON" for Weather Widget. See Widget Setup (P.21). 1 be played depending on their condition. *1 A progressive format is not supported.
  • Kenwood DNX875S | User Manual - Page 21
    ÑÑPhoto Frame 1 Press the [HOME] button. 2 Flick the widget area to the left/right to display the photo frame widget. • Scroll the screen to display the hidden part. Widget Setup Set up the widgets on the Home screen. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP screen
  • Kenwood DNX875S | User Manual - Page 22
    Disc Disc Playing a disc ÑÑInsert a disc 1 Press the [G] button. 2 Touch [DISC EJECT]. hhThe panel opens. 3 Insert the disc into the slot. hhThe panel closes automatically. The unit loads the disc and playback starts. ÑÑEject a disc 1 Press the [G] button. 2 Touch [DISC EJECT]. When removing a disc,
  • Kenwood DNX875S | User Manual - Page 23
    • Linear PCM, etc.: Audio format • OFF/Zoom2 - 4 (DVD)/ Zoom2 (VCD): Displays the zoom ratio. • [Hide]: Hides the control screen. • [ ] : Repeats the current content. Each time you touch the key, repeat modes are switched in the following sequence; DVD: Title repeat ( ), Chapter repeat ( ), Repeat
  • Kenwood DNX875S | User Manual - Page 24
    remote controller mode switch to AUD mode before starting operation for Music CD and audio files, see Switch the operation mode (P.88). • In this manual, "Music CD" means a general CD which includes music tracks. "Disc media" means a CD/DVD disc which includes audio or video files. • The screen shot
  • Kenwood DNX875S | User Manual - Page 25
    7 Function panel (Disc media only) Touch the left side of the screen to display the function panel. Touch again to close the panel. Searches for the previous/next folder. 8 Indicator Items • [IN]: Disc insertion status. White: A Disc is inside the unit. Orange: Disc player failure. • [VIDEO]:
  • Kenwood DNX875S | User Manual - Page 26
    Disc DVD Disc Menu Operation You can set up some functions using the DVDVIDEO disc menu. 1 Touch the framed area during playback. ■■To switch among picture angles Touch [Angle]. Each time you touch this key, picture angles are switched. * These keys may not function depending on the disc. hhMenu
  • Kenwood DNX875S | User Manual - Page 27
    DVD Setup You can set up the DVD playback functions. 1 Touch the framed area during playback. 2 Touch [ ] on the left side of the screen. Touch [SETUP]. Disc ■■[Screen Ratio] Sets the screen display mode. [16:9 ](Default): Displays wide pictures. [4:3 LB]: Displays wide pictures in the Letter Box
  • Kenwood DNX875S | User Manual - Page 28
    APPS-Android Auto™/Apple CarPlay APPS-Android Auto™/Apple CarPlay Apple CarPlay Operation CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make
  • Kenwood DNX875S | User Manual - Page 29
    access convenient functions on the Android device while driving. For details about Android Auto, visit https:// www.android.com/auto/ and https://support. google.com/androidauto. Compatible Android devices You can use Android Auto with Android devices of Android version 5.0 (Lollipop) or later. For
  • Kenwood DNX875S | User Manual - Page 30
    APPS-Android Auto™/Apple CarPlay Wireless connection When the Android device is ready for wireless connection, connecting it via the USB registers Bluetooth and Wi-Fi automatically. Thus, the registered Android device will be able to be connected wirelessly to be used as an Android Auto source. 1
  • Kenwood DNX875S | User Manual - Page 31
    smartphone is connected to the USB terminal. Preparation • Install the latest version of the WebLink application "WebLink for KENWOOD" on your iPhone or Android. iPhone: Search for "WebLink for KENWOOD" in the Apple App Store to find and install the most current version. Android: Search for "WebLink
  • Kenwood DNX875S | User Manual - Page 32
    APPS-Android Auto™/Apple CarPlay ÑÑOperation buttons and available Apps on the App screen WebLink source screen 1 1[ ] Displays the main menu of the "WebLink" source screen. Returns to the previous screen. 1 Operate on your smartphone. • When you are asked to communicate between your smartphone and
  • Kenwood DNX875S | User Manual - Page 33
    , the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Spotify cannot be operated from this unit. • For issues on using the application, contact Spotify at www.spotify
  • Kenwood DNX875S | User Manual - Page 34
    APPS-Android Auto™/Apple CarPlay Pandora® Operation You can listen to Pandora® on this unit by controlling the application installed in the iPhone or Bluetooth device. To select the Pandora source, touch the [Pandora] icon on the source selection screen. (P.12) Preparation • Install the latest
  • Kenwood DNX875S | User Manual - Page 35
    legal for more information. • Because Pandora® is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Pandora® cannot be operated
  • Kenwood DNX875S | User Manual - Page 36
    the USB device. ÑÑUsable USB device You can use a mass-storage-class USB device with this unit. The word "USB device" appearing in this manual indicates a flash memory device. ●●About the file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT • NTFS NOTE • Install
  • Kenwood DNX875S | User Manual - Page 37
    USB/SD Basic Operation Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD mode before starting operation, see Switch the operation mode (P.88). Control screen 1 2 6 5 7 3 4 Open the drawer 7 5 Close the
  • Kenwood DNX875S | User Manual - Page 38
    USB/SD Video screen 9 9 10 9 File search area (Video file only) Touch to search for the next/previous file. 10 Key display area (Video file only) Touch to display the control screen. Search Operation You can search music or video files by the following operations. 1 Touch [1]. 2 Touch [S]. 3
  • Kenwood DNX875S | User Manual - Page 39
    5s • iPhone 5c • iPhone 5 • iPod touch (6th generation) • iPod touch (5th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with the iPod connection cable KCA-iP103 (optional accessory), you can
  • Kenwood DNX875S | User Manual - Page 40
    iPod/iPhone 1 Connect the iPod/iPhone using the KCA- iP103. (P.98) 2 Press the [HOME] button. 3 Touch [ ]. 4 Touch [iPod]. (P.12) ●●To disconnect the iPod/iPhone connected with the cable: 1 Detach the iPod/iPhone. Bluetooth connection Pair the iPhone through Bluetooth. Preparation • To connect an
  • Kenwood DNX875S | User Manual - Page 41
    7 Indicator Items • [MUSIC]: Identifies the music file. Search Operation You can search music files by the following operations. 1 Touch [1]. 2 Touch [S]. iPod/iPhone ÑÑLink search You can search for a file of the same artist/ album/genre/composer as that in the current track. 1 Touch [Link Search
  • Kenwood DNX875S | User Manual - Page 42
    the operation mode (P.88). • HD Radio broadcasting is for North American sales area only. • The screen shot below is for tuner. It may be Tunes in the memorized stations one after another. • [MANUAL]: Switches to the next frequency manually. 3 Picture • Displays/hides picture area. • The
  • Kenwood DNX875S | User Manual - Page 43
    5 Operation keys • [E] [F] : Tunes in a station. The method of switching frequencies can be changed (see 2 Seek mode). • [CHS] [CHR] : Selects a channel. • [1] : Display the Channel List screen. See Channel search (P.45). • [ ] : Display a list of registered bookmarks. See Bookmark list (P.46). • [
  • Kenwood DNX875S | User Manual - Page 44
    only. Memory Operation ÑÑAuto memory You can store stations with good reception in the memory automatically. 1 Touch desired band key. hhAuto memory starts. ÑÑManual memory You can store the currently being received station or channel in the memory. 1 Select the station or channel you wish to store
  • Kenwood DNX875S | User Manual - Page 45
    ÑÑDirect search You can tune in by entering the desired frequency or channel number. 1 Touch [ ] on the left side of the screen. Touch [10key Direct]. HD Radio™ Tuner 2 Select the desired content from the list. 2 Select the search method. 3 Enter the frequency or channel number. 4 Touch [Enter].
  • Kenwood DNX875S | User Manual - Page 46
    HD Radio™ Tuner Bookmark Stores tag information (title, artist, album, URL, and description) about the song you are listening to now. Detailed information and QR codes can be displayed according to the stored tag information. ÑÑBookmark registration 1 Touch [ ] on the left side of the screen. Touch
  • Kenwood DNX875S | User Manual - Page 47
    Alert Message This function is to receive alert messages. First, you need to turn on the "Emergency Alerts". (P.42) ÑÑWhen an Alert Message comes HD Radio™ Tuner ÑÑDisplay of the received Alert Message You can read the received alert message afterward. 1 Touch [ ] on the left side of the screen.
  • Kenwood DNX875S | User Manual - Page 48
    place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world activatenow Phone: Call SiriusXM Listener Care at 1-866635-2349 --For users in Canada: Online: Visit http://www.siriusxm.ca/help/ activation-help/ Phone:
  • Kenwood DNX875S | User Manual - Page 49
    tuner models. It may take a few minutes after power on to get the first full report on your city. Traffic channels are not available in Canada. *2 When SXV200 or SXV100 is connected with this unit. *3 Compatible with SXV200 or later tuner models. *4 Compatible with SXV300 or later tuner models
  • Kenwood DNX875S | User Manual - Page 50
    SiriusXM® Storing Channels in Preset Memory You can store the current channel in memory. 1 Tune in the channel you wish to store in the memory. 2 Touch [ ] on the right side of the screen. Direct search You can tune in a channel directly. 1 Touch [ ] on the left side of the screen. Touch [Direct
  • Kenwood DNX875S | User Manual - Page 51
    dynamic and can change often, allowing you to discover new channels. --You can set whether to be notified when the featured seasonal theme is updated. (P.59) ■■[E] [F] Press to skip to the previous/next track. Press and hold to rewind or fast forward. (It will be cancelled automatically after about
  • Kenwood DNX875S | User Manual - Page 52
    SiriusXM® To return to live music/content 1 Touch the left side of the screen. 2 Touch [Live]. TuneMix™ TuneMix™ plays a unique blend of songs from your Preset music channels of the current SiriusXM Preset Band, allowing you to build a custom channel from as few as two to as many as 6 music channels
  • Kenwood DNX875S | User Manual - Page 53
    Traffic & Weather Now™ Traffic & Weather Now™ allows you to access the latest report whenever you want to hear it. Select your city in the set up menu Select a City for Traffic & Weather (P.59). 1 Touch [ ] on the left side of the screen. SiriusXM® Content Alerts When a broadcast program related to
  • Kenwood DNX875S | User Manual - Page 54
    Alerts (P.56) • Set up the teams for SportsFlash™ (P.58) • Select the city for Traffic & Weather Jump or Traffic & Weather Now™ (P.59) • Select the Featured Bands Update Messages (P.59) • Set up the TuneStart™ (P.59) • Reset to the default settings (P.59) 54
  • Kenwood DNX875S | User Manual - Page 55
    ÑÑParental code You can set a SiriusXM parental code for Parental Control. 1 Touch [Parental Code] on the SiriusXM SETUP screen. hhParental Pass Check screen appears. NOTE • The code number is set to "0000" as default. 2 Enter the current code number and touch [Enter]. hhParental Pass 1st screen
  • Kenwood DNX875S | User Manual - Page 56
    SiriusXM® NOTE • Touch [All-Channels] to display all channels. • To delete the parental lock channel setting, touch [Disable All] and then touch [YES] on the confirmation screen. 4 Touch each channel on the list and set to ON or OFF. [ON]: Locks the channel. [OFF]: Unlocks the channel. NOTE • Touch
  • Kenwood DNX875S | User Manual - Page 57
    3 Touch each content list item you want to check or uncheck. SiriusXM® To select a Team Get alerted when your favorite sports team is playing on another SiriusXM channel with GameAlert™ 1 Touch [My Games]. NOTE • You can select (þ) up to 60 artists or songs. ●●To delete the Artist and Song 1 Touch
  • Kenwood DNX875S | User Manual - Page 58
    SiriusXM® ÑÑSportsFlash™ setup Activating SportsFlash 1 Touch [SportsFlash] on the SiriusXM SETUP screen. hhSportsFlash is turned on or off. Default is "ON". Selecting SportsFlash Beep 1 Touch [SportsFlash Beep] on the SiriusXM SETUP screen. hhSportsFlash Beep is turned on or off. Default is "ON".
  • Kenwood DNX875S | User Manual - Page 59
    SiriusXM settings are reset to defaults. ÑÑSelecting Featured Bands Update Messages You can set whether to be notified when the featured seasonal theme is updated. 1 Touch [Featured Bands Update Messages] on the SiriusXM SETUP screen. Featured Bands Update Messages is turned on or off. English 59
  • Kenwood DNX875S | User Manual - Page 60
    ) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.6) (Audio/Video Remote Control Profile) Sound codec SBC, AAC NOTE • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard according to the procedure prescribed by Bluetooth SIG
  • Kenwood DNX875S | User Manual - Page 61
    Register the Bluetooth device It is necessary to register the Bluetooth audio player or cell-phone in this unit before using the Bluetooth function. You can register up to 10 Bluetooth devices. NOTE • Up to 10 Bluetooth devices can be registered. If an attempt is made to register the 11th Bluetooth
  • Kenwood DNX875S | User Manual - Page 62
    Bluetooth Control ÑÑConnect the Bluetooth device 1 Touch [Select Device] on the Bluetooth SETUP screen. To delete the registered Bluetooth device 1 Touch [Delete]. 2 Touch the name of the device you want to connect. 2 Touch the device name to check. hhProfile select screen appears. NOTE • If the
  • Kenwood DNX875S | User Manual - Page 63
    ÑÑChange the PIN Code 1 Touch [PIN Code] on the Bluetooth SETUP screen. hhChange PIN Code screen appears. 2 Touch and hold [ ]. 3 Input the PIN Code. 4 Touch [SET]. ÑÑChange the device name 1 Touch [Device Name] on the Bluetooth SETUP screen. hhChange Device Name screen appears. 2 Touch and hold [
  • Kenwood DNX875S | User Manual - Page 64
    Music Mix Bluetooth audio devices can be switched easily to play music. See KENWOOD Music Mix (P.64). * These items appear only when the audio player which supports AVRCP profile is connected. NOTE • The operation buttons, indications and information displayed on the screen differ depending on
  • Kenwood DNX875S | User Manual - Page 65
    -Free function can be used. ÑÑMake a call 1 Press the [HOME] button. 2 Touch [ ]. 3 Touch [TEL]. hhHands Free screen appears. NOTE • If your mobile phone supports PBAP, you can display the phone book and call lists onto the touch panel screen when the mobile phone is connected. --Phone book: up to
  • Kenwood DNX875S | User Manual - Page 66
    Bluetooth Control 4 Select a dialing method. Call using call records 1 Touch [ ]. 2 Select the phone number from the list. • [ ]: Call using call records • [ ]: Call using the phonebook • [ ]: Call using the preset number • [ ]: Call by entering a phone number ●●Select the cell-phone to use When
  • Kenwood DNX875S | User Manual - Page 67
    Call using the phonebook 1 Touch [ ]. 2 Touch [ ]. 3 Select the initial. Bluetooth Control ÑÑVoice Recognition You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.)
  • Kenwood DNX875S | User Manual - Page 68
    Bluetooth Control ÑÑOperations during a call ●●Adjust the volume of your voice 1) Touch [Speech Quality]. 2) Touch [T] or [U] for [Microphone Level]. ●●Call-waiting When you receive a new call while talking on the phone, you can answer the newly received call by touching [ ]. The current call is
  • Kenwood DNX875S | User Manual - Page 69
    ÑÑPhone number preset You can register frequently used phone numbers in this unit. 1 Touch [ ]. 2 Touch [Edit]. Bluetooth Control ■■ [Delete] To delete a preset number, touch [Delete] and then touch [OK] on the confirmation screen. ÑÑPhonebook transfer You can transfer phonebook data from your
  • Kenwood DNX875S | User Manual - Page 70
    Bluetooth Control Hands-Free Setup You can make various settings for the HandsFree function. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Bluetooth]. hhBluetooth SETUP screen appears. 4 Touch [TEL SETUP]. hhTEL SETUP screen appears. 5 Set
  • Kenwood DNX875S | User Manual - Page 71
    this when no camera is connected. ■■[Rear Camera Settings *]1 Adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set. For details, see the instruction manual of your camera. ■■[Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse
  • Kenwood DNX875S | User Manual - Page 72
    is connected with this unit. To adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instruction manual supplied with the rear view camera. • When adjusting the parking guidelines, make sure to apply the parking brake to prevent the car from
  • Kenwood DNX875S | User Manual - Page 73
    Camera, DRV-N520 (optional accessory), connected to this unit lets you play video-recorded data and so on. For details, see the instruction manual of the Dashboard Camera DRV-N520 (optional accessory). NOTE • To connect a dashboard camera, see P.98. ÑÑDisplay the dashboard camera screen 1 Press the
  • Kenwood DNX875S | User Manual - Page 74
    Other External Components OEM Features Operation By connecting this unit to the bus system of the vehicle using an iDataLink (commercially available), this unit can access the satellite radio source provided for the vehicle and can display vehicle information on this unit. 1 Press the [HOME] button.
  • Kenwood DNX875S | User Manual - Page 75
    Setup Monitor Screen Setup You can adjust the image quality of video, menu screen, etc. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Screen Adjustment]. System Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. Setup hhScreen Control screen appears. 3 Adjust each
  • Kenwood DNX875S | User Manual - Page 76
    appears. 4 Set each parameter as follows. ■■[Beep] (DNX875S) Turn the key touch tone on or off. Default is Manual]: Set the clock manually. ■■[Time Zone] If you have selected [Manual] for Clock, select the time zone. ■■[Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually
  • Kenwood DNX875S | User Manual - Page 77
    Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP screen appears. 3 Touch [Special]. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. hhSpecial screen appears. 4 Set each parameter as follows. ■■ [DEMO] Select the
  • Kenwood DNX875S | User Manual - Page 78
    Setup Display Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP screen appears. 3 Touch [Display]. ÑÑCustomizing the key color You can set the button illumination color. 1 Touch [Key Color] on the Display screen. 2 Touch the desired color. hhDisplay screen appears. 4
  • Kenwood DNX875S | User Manual - Page 79
    ÑÑChange the wallpaper image or color 1 Touch [Wallpaper Customize] on the Display screen. 2 Select an image. *1 *2 *3 Setup To register an original image You can load an image from the connected USB device and set it as the wallpaper image. Before starting this procedure, it is necessary to
  • Kenwood DNX875S | User Manual - Page 80
    Setup AV Setup You can set AV parameters. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP screen appears. 3 Touch [AV]. hhAV screen appears. 4 Set each parameter as follows. ■■[Android Auto Device Select] Select the device to be used in the Android Auto mode. (P.30) ■■ [AV-
  • Kenwood DNX875S | User Manual - Page 81
    (1) you wish to adjust and set each parameter (2) as follows. 1 2 ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. When the speaker type and size are selected, the speaker crossover network is set automatically. ■■[Location] (Only for Front, Rear) Select the
  • Kenwood DNX875S | User Manual - Page 82
    Controlling Audio ■■[Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over] Display the speaker crossover setup screen. You can adjust the crossover frequency that was set automatically when you selected the speaker type.
  • Kenwood DNX875S | User Manual - Page 83
    Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Equalizer]. Controlling Audio ■■[SW Level] Adjust the subwoofer volume. This setting is not available
  • Kenwood DNX875S | User Manual - Page 84
    Controlling Audio Volume Offset Finely adjust the volume of the current source to minimize the difference in volume between different sources. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Volume Offset]. Zone Control You can select different
  • Kenwood DNX875S | User Manual - Page 85
    NOTE • When the rear speaker sound is switched, the audio source that is output at the AV OUTPUT terminal is also switched to the same source. • When the dual zone function is set to on, the following functions are not available. --Output from the subwoofer --Subwoofer Level/ Bass Boost (P.85) --
  • Kenwood DNX875S | User Manual - Page 86
    Controlling Audio Listening Position/ DTA Listening Position/DTA allows you to improve the sound field depending on the position of the seat you sit. Listening Position/DTA allows you to set "Listening Position" and "Front Focus". You cannot set both at the same time. 1 Press the [MENU] button.
  • Kenwood DNX875S | User Manual - Page 87
    ÑÑFront Focus fine adjustment 1 Touch [Adjust]. 2 Touch [Delay]. 3 Set each parameter as follows. Controlling Audio Audio Setup memory Audio Control settings can be memorized. The memorized settings can be recalled at any time. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio].
  • Kenwood DNX875S | User Manual - Page 88
    Remote control Remote control This unit can be operated using the remote control KNA-RCDV331 (optional accessory). # CAUTION • Put the remote control in a place where it will not move during braking or other operations. A dangerous situation could result, if the remote control falls down and gets
  • Kenwood DNX875S | User Manual - Page 89
    Remote control ■■ DVD Title number/Chapter number ■■VCD 1.X and 2.X (PBC OFF) Track number ■■VCD 2.X (PBC ON) Scene number/Track number ■■Music CD Track number ■■HD Radio tuner Frequency value/Channel number ■■ SiriusXM Channel number 2 Enter the number of the content you want to play using the
  • Kenwood DNX875S | User Manual - Page 90
    Remote control Key Name 9 VOICE 10 VIEW 11 MAP DIR 12 R/S 13 C/D 14 Numeric Keypad 15 * + 16 # BS 17 AUDIO 18 CANCEL 19 SUBTITLE 20 21 ANGLE 22 Vol RS 23 ZOOM 24 2 ZONE 25 R.VOL 26 ATT Mode switch AUD DVD NAV AUD, DVD NAV AUD, DVD NAV AUD, DVD AUD, DVD AUD DVD DVD AUD, DVD DVD DVD NAV DVD − DVD −
  • Kenwood DNX875S | User Manual - Page 91
    of the unit. Metal part such as the heat sink and enclosure become hot. NOTE • Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals. • Make sure to ground the unit to a negative 12V DC power supply. • Do not install the
  • Kenwood DNX875S | User Manual - Page 92
    Connection/Installation • Do not press hard on the panel surface when 9 installing the unit to the vehicle. Otherwise scars, damage, or failure may result. • Reception may drop if there are metal objects near the Bluetooth antenna. 0 (3.5 m) x1 Bluetooth antenna unit ÑÑSupplied accessories
  • Kenwood DNX875S | User Manual - Page 93
    Installing the unit ÑÑNon-Japanese cars (DNX995S) Connection/Installation ●●General Motors cars (DNX995S) 1) Cut out accessory - to meet the shape of the opening of the center console. 2) Attach accessory - to the unit. - Bend the tabs of the mounting sleeve with a screwdriver or similar utensil
  • Kenwood DNX875S | User Manual - Page 94
    Connection/Installation ÑÑGPS antenna GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. To mount the GPS antenna inside your vehicle: 1) Clean your dashboard or other surface. 2) Remove the separator
  • Kenwood DNX875S | User Manual - Page 95
    ÑÑRemoving the trim plate (DNX995S) 1) Engage the catch pins on the extraction key (accessory 5) and remove the two locks on the lower level. Lower the trim plate (accessory 8) and pull it forward as shown in the figure. 8 5 Connection/Installation ÑÑRemoving the unit (DNX995S) 1) Remove the trim
  • Kenwood DNX875S | User Manual - Page 96
    right speaker Green Connect to the vehicle's parking brake detection switch Accessory 1 harness. Light Green PRK SW (Parking sensor wire) (2 m) For best safety, be sure to connect the parking sensor. Ignition key switch Red (Ignition wire) Yellow (Battery wire) Green/Black To rear left
  • Kenwood DNX875S | User Manual - Page 97
    4 SiriusXM Connect Vehicle Tuner connector For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner. 5 iDatalink connector 6 AV-IN (CA-C3AV; Optional Accessory) input 7 Dashboard camera interface Connect a Dashboard Camera DRV
  • Kenwood DNX875S | User Manual - Page 98
    Connection/Installation ÑÑConnecting an iPod/iPhone ●●Lightning connector KCA-iP103 (0.8m)[3] iPod/iPhone[2] Accessory 3 (Gray) (1 m) [4] Accessory 2 (Black) (1 m) [4] USB (Gray) terminal[1] USB (Black) terminal[1] ÑÑConnecting an Android smartphone Micro USB to USB cable[2] Android
  • Kenwood DNX875S | User Manual - Page 99
    Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems. NOTE • Some functions of this unit may be disc and try inserting it again. Contact the KENWOOD dealer if this indicator continues blinking or the disc cannot be ejected. English 99
  • Kenwood DNX875S | User Manual - Page 100
    Troubleshooting " message does not disappear, contact your nearest KENWOOD dealer. No Device (USB device) The USB Check the USB device. Some trouble may have occurred to the the radio. Subscription Updated - Press Return To to subscribe to this channel. †† In Canada, visit www.siriusxm.ca or call
  • Kenwood DNX875S | User Manual - Page 101
    CD CD-EXTRA HDCD CCCD Others Dualdisc Super audio CD v : Playback is possible. r : Playback is partly possible. × : Playback is impossible. Support Remark v × × v • MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ MPEG1/ MPEG2/ MPEG4/ H.264/ WMV/ MKV playback • Multi-border/Multisession playback
  • Kenwood DNX875S | User Manual - Page 102
    . • WMA and AAC files with DRM cannot be played. • DSD sound is converted to PCM sound before playback. • The EmChinks tag of DSDIFF is not supported. • Although the audio files complies with the standards listed above, they may not be played depending on the types or conditions of media or device
  • Kenwood DNX875S | User Manual - Page 103
    the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual. Prohibition Mark ■■Discs with limited period of use Do not leave discs with a limited period of use in this unit. If you load an already
  • Kenwood DNX875S | User Manual - Page 104
    Appendix DVD Language Codes Code Language aa Afar ab Abkhazian af Afrikaans am Amharic ar Arabic as Assamese ay Aymara az Azerbaijani ba Bashkir be Byelorussian bg Bulgarian bh Bihari bi Bislama bn Bengali, Bangla bo Tibetan br Breton ca Catalan co Corsican cs Czech
  • Kenwood DNX875S | User Manual - Page 105
    : TN LCD panel Drive System : TFT active matrix system Number of Pixels DNX995S : 2,764,800 (1280H x 720V x RGB) DNX875S : 1,152,000 (800H x 480V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : LED ■■DVD player section D/A Converter : 24/ 32 bit Audio
  • Kenwood DNX875S | User Manual - Page 106
    Output Power : Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec : SBC/ AAC Profile (Multi Profile support) • HFP (V1.7) (Hands Free Profile) • SPP (Serial Port Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (V1.6) (Audio/Video Remote Control
  • Kenwood DNX875S | User Manual - Page 107
    Output frequency band : 20 - 88,000 Hz Preout Level (V) DNX995S : 5 V/ 10 kΩ DNX875S : 4 V/ 10 kΩ Preout Impedance : ≤ 300 Ω Speaker Impedance : 4 - 8 Ω Cold : 29 seconds (typ) (All satellites at -130 dBm Without aiding) Update Rate : 1/second, continuous Accuracy Position:
  • Kenwood DNX875S | User Manual - Page 108
    by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor (Abalta Technologies, Inc.), except
  • Kenwood DNX875S | User Manual - Page 109
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Kenwood DNX875S | User Manual - Page 110
    expressly approved in the instruction manual. The user could lose in accordance with the instructions may cause harmful interference (Industry Canada) Notice This device complies with Industry Canada's applicable to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI
  • Kenwood DNX875S | User Manual - Page 111
    ■■Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos dom
  • Kenwood DNX875S | User Manual - Page 112
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
B5A-2482-00
(K)
© 2018 JVC KENWOOD Corporation
DNX995S
DNX875S
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided
below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or
service on the product.
Model DNX995S/ DNX875S
Serial number
US Residence Only
Register Online
Register your KENWOOD product at
www.kenwood.com/usa/
•
Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from
•
The Instruction manual is subject to change for modification of
specifications and so forth. Be sure to download the latest edition of the
Instruction manual for reference.