Kenwood DNX875S User Manual - Page 82
Controlling General Audio, Crossover network setup
View all Kenwood DNX875S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Controlling Audio ■■[Tweeter] (Only for Front) You can set up the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over] Display the speaker crossover setup screen. You can adjust the crossover frequency that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.82) ÑÑCrossover network setup You can set the crossover frequency of speakers. 1 Touch [X`over]. 2 Touch the speaker to set up. 3 Set each parameter as follows. ■■[TW Gain] *2 Adjust the tweeter level. (When Front is selected on the Speaker Select screen) ■■[Phase Inversion]*3 Set the phase of subwoofer output. Check [Phase Inversion] to shift the phase 180 degrees. (When Subwoofer is selected on the Speaker Select screen) *1 Only when "LPF FREQ"/"HPF FREQ" is set to a mode other than "Through" in [X`over]. *2 Only when "Tweeter" is set to "Small", "Medium", "Large" in [Speaker Setup]. *3 Only when "Subwoofer" is set to a mode other than "None" in [Speaker Setup]. Controlling General Audio 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Fader / Balance]. 4 Set each parameter as follows. ■■[HPF FREQ] High Pass Filter adjustment. (When Front or Rear is selected on the Speaker Select screen) ■■[LPF FREQ] Low Pass Filter adjustment. (When Subwoofer is selected on the Speaker Select screen) ■■ [Slope]*1 Set a crossover slope. ■■ [Gain] Adjust the gain of the front speaker, rear speaker, or subwoofer. 82 ■■[Fader / Balance] Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. ■■ [Center] Clear the adjustment.