Kenwood DNX875S User Manual - Page 71
Other External Components, View Camera
View all Kenwood DNX875S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Other External Components Other External Components View Camera NOTE • To connect a camera, see P.97. • To use a rear view camera, a REVERSE lead connection is required. (P.96) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position. ÑÑDisplay the camera screen 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Camera]. hhView camera screen appears. 3 Adjust each item as follows. To erase the caution message, touch the screen. 1 3 4 2 1 Switching the View Camera *1 Touch to change the front view camera or dashboard camera and rear view camera. 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline *2 Touching each time turns on or off the guideline. 4 Switching the Angle *2 Touching each time changes camera angles: *1 When the front camera or dashboard camera, and rear camera are connected with this unit. *2 When CMOS-3xx series is connected with this unit. ÑÑCamera Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Camera]. hhCamera screen appears. 4 Set each item as follows. ■■[Rear Camera Interruption] [ON]: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. [OFF ](Default): Select this when no camera is connected. ■■[Rear Camera Settings *]1 Adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set. For details, see the instruction manual of your camera. ■■[Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is "ON". ■■[Guidelines SETUP] If you select [ON] for [Parking Guidelines], you can adjust the parking guidelines. See To adjust the parking guidelines (P.72). ■■[Front Camera] [ON]: Select this when the front camera is connected. [OFF ](Default): Select this when no camera is connected. English 71