Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 112

102 Chapter 7-Managing color d. While pressing the measuring button, slide the instrument along the ruler from left to right. Note: Try to slide the instrument at a constant speed. if the speed is too fast or too slow, an error may occur. e. When the specimen measuring port comes to the position where it touches the other end of the ruler's opening on the right, release the measuring button. When you release the measuring button the device beeps. If the scan is successful, a check mark appears in the wizard screen on the left of the row you have just scanned, and an arrow appears on the next line in the wizard, indicating the next row to scan. If the scan is not successful a red icon appears in the wizard on the left of the row you have just scanned indicating that the scan was not successful. You must rescan that row until a check mark appears in the wizard on the left of the row indicating a successful scan. f. Move the ruler to the next row on the chart and align the opening to the next row of the chart indicated by the arrow in the wizard screen. g. Repeat the above steps until you have successfully measured each row in the printed chart. Note: The chart may comprise more than one page, depending on the tray chosen in step 4c on page 90. 8. (Optional) To save the measurement file and load it at a later time, locate a folder and in the Save in box, type a name for the measurement file. 9. (Optional) Click Save. 10. Click Next. 11. Click Create Profile. Note: This process might take a few minutes. 12. In the Profile Name box, type a new name for the profile, or keep the name that the Profiling Tool automatically created based on the screening method. 13. To define the location for saving the destination profile, select one of the following options: ○ Profile Manager-The profile automatically appears in the Profile Manager area. ○ Other-Saves the profile in a specified location, which you can import later to the Profile Manager area in the Resource Center. 14. Click Save to save the profile.