Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 128
G7 based, Destination profile, Linked, Calibration, Print, The Generate Report window appears.
View all Konica Minolta AccurioPress C2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
118 Chapter 7-Managing color 9. If you have not selected G7 based proceed as follows: a. In the Destination profile, list select from the following: ● Linked-This is the default setting and is automatically linked to the last profile generated for this media type using the Profiling tool. ● Manually select one of the other profiles in the list. b. In the Calibration list, select from the following: ● Linked-This is the default setting and is automatically linked to the last calibration for this media type. ● Manually select one of the other calibrations in the list. 10. Click Print. The validation chart prints using the standard screen and resolution of 1200 dpi. The Generate Report window appears, as shown in step 11c. 11. Perform the following steps if an ICCU is not connected to your printer. a. Collect the chart from the printer. b. Follow the steps in the wizard to perform the measurements. When you finish measuring the chart, the following message appears. c. Click OK, and then click Next. The Generate Report window appears.