Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 126
Validating a color profile, Requirements, Tools, Validation Tool, Measuring device, Validation wedge
View all Konica Minolta AccurioPress C2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
116 Chapter 7-Managing color Validating a color profile Requirements: ● Your measuring device must be connected to the USB port on the IC-314 print controller. The first time that you connect the device to the IC-314 print controller, you are notified that the driver is being installed. Wait for the driver installation to finish before proceeding further. ● Make sure that your measuring device is calibrated. ● All queues must be ready for printing (not suspended), and the printer must be warmed up. 1. From the Tools menu, select Validation Tool. The Print Color Chart window appears. 2. From the Measuring device list, select the device that you want to use to perform the measurement. 3. From the Validation wedge list, select the required validation wedge. You can select from: ○ Fogra V3.0 ○ IDEAlliance 2013 4. In the Tray list, select the tray from which you want to print. The media type in the selected tray appears. Note: There is no need to change the default settings for Screening.