Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 163

Printing a folded signature job 153 Printing a folded signature job Use the folded signature imposition method to print a book. Requirements: ● This example assumes that your job is a book with a trim size of 8.2 by 11.0 inches. ● Create a finishing mark set to determine where the finisher will cut between each signature. Note: This option is only available with the Action Pack. 1. In the Storage area, double-click your job. 2. In the job parameters window, click the Print tab, and then click the Paper Stock parameter. 3. In the Paper Stock list, select the paper profile for your job. 4. Click the Imposition tab, and then click the Imposition method parameter. 5. In the Methods list, select Folded Signature. 6. Click the Templates parameter. 7. In the Layout list, select 16 Pg. Booklet Type7. 8. Click Preview. 9. Click Thumbnail view, and verify that there are no imposition conflicts. 10. Click Close. 11. Click the Marks parameter. 12. In the Marks list, select Crop & fold marks and select the Both sides check box. 13. In the Marks color list, select a color for the marks that will be placed on the printed sheets. Note: If you want to place marks on a job that has a dark bleed, select white or gray for the marks color. 14. Select the Print hairline where sheet folds check box. 15. Click the Signature Marks parameter. 16. In the Mode list, select Auto. Note: Signature marks print marks along the spine of the book, and help to assemble printed signatures for binding in the correct order. 17. Click the Finishing tab, and then click the Marks and barcodes parameter. 18. Click Add.